Contact Me

Email: engr.mashood.blog@gmail.com (I am currently inactive till further notice)

Comments

  1. Unknown15 July 2019 at 06:55

    Water Environment Federation, a not-for-profit association that provides technical education and training for water quality professionals, is producing a book called Industrial Wastewater and is seeking reprint permission to use the figure below.


    https://chempds.blogspot.com/2018/11/crystallizer-design-considerations.html

    If you are able and willing to provide permission to use this image in our upcoming publication, I will send a permission form for you to fill.

    Please let me know if I can provide additional information or answer any questions.

    Thank you very much for your time and consideration.

    Sincerely,
    Katherine Saltzman


    Katherine Saltzman
    Production Coordinator
    Water Environment Federation
    703-684-2400 ext. 7760
    www.wef.org

    ReplyDelete
  2. bharti20 September 2021 at 04:41

    To provide you with pure drinking water, Multiple comes with RO-UV purification technology. The water first passes through the RO membrane that removes all the harmful chemicals. The UV purification stage removes all the microbiological organisms. To add minerals to the drinking water, Multiple comes with a Mineral cartridge. The purification process of the water purifier is mentioned below.
    Ro Services in Chandni Chowk

    ReplyDelete
  3. bharti20 September 2021 at 04:46

    To provide you with pure drinking water, Multiple comes with RO-UV purification technology. The water first passes through the RO membrane that removes all the harmful chemicals. The UV purification stage removes all the microbiological organisms. To add minerals to the drinking water, Multiple comes with a Mineral cartridge. The purification process of the water purifier is mentioned below.
    Ro Services in Gandhi Nagar

    ReplyDelete

Post a Comment

Popular posts from this blog

Sizing Of A Rotary Dryer

Image
        Rotary dryers , called the “workhorse of chemical dryers” , belong to the most widely used class of continuous dryers in process industries. These dryers are suitable for relatively free-flowing, non-sticky and granular materials; for example, almost all types of crystals after crystallization and washing. Typical applications of rotary dryers are in drying o table salt, sodium sulphate, ammonium sulphate, and many other salts, drying of sand, minerals, organic solids, polymer resin beads, to mention a few. A rotary dryer consists of a slowly rotating slightly inclined cylindrical shell fed with the moist solid at the upper end. The material flows along the rotating shell, gets dried and leaves the dryer at the lower end.          It is difficult, if not impossible, to design a rotary dryer on the basis of fundamental principles only. The available design correlations are a few in number and may not prove to be satisfacto...
Read more

Design Calculation (Sizing) Of A Crystallizer

Image
Problem Statement And Given Data: Given the following data and information, it is required to design a forced circulation crystallizer of the type shown in Figure 1 operating under vacuum. Figure 1 Forced circulation (FC) evaporation crystallizer.   Feed (an aqueous solution) rate, Qi = 15 m 3 /h, feed concentration, Ci = 200 kg/m 3 solution; feed temperature = 55 o C; average density of the solution = 1100 kg/m 3 and average specific heat = 0.90 kcal/kg. o C; operating pressure = 100 mm Hg (660 mm Hg vacuum); boiling point elevation of the saturated solution = 13 o C; saturation concentration at the crystallization temperature = 250 kg/m 3 ; magma density allowed, M T = 350 kg crystal/m 3 solution; crystal growth rate determined experimentally under the conditions of the crystallizer, G = 4.67 x 10 -8 m/s; crystal density = 1700 kg/m 3 ; desired dominant crystal size L D = 0.8 mm; heat of vaporization of water at the temperature of the crystallizer = 570 kcal/kg...
Read more

Cooling Tower Design Calculations - Height of Packing & Air Flow Rate

Image
Problem Statement & Given Data: Warm water at 45°C is to be cooled to 30°C by countercurrent contact with air in a tower packed with wood slats. The inlet air has a dry-bulb temperature of 31°C and a wet-bulb temperature of 22°C. The mass flow rate of water is 6000 kg/m 2 .h and that of air is 1.4 times the minimum. The individual gas-phase mass transfer coefficient is k Y’ a = 6000 kg/m 3 .h.∆Y’. The volumetric water-side heat transfer coefficient is given by h L a = 0.059 x L 0.51 x G S , in kcal/m 3 .h.K, where L and G S are mass low rates of water and air (dry basis). Determine (a) the dry air flow rate to be used, (b) the height of packing. Solution: (a)                                                Inlet air: T G = 31°C; T W = 22°C = T as                             ...
Read more